The reducer is actually a power transmission mechanism, which does not generate power itself. Its function is to use the different gear sizes and speed converters to reduce the number of revolutions of the motor (motor) to the number of revolutions you want, and get a larger number of revolutions. Torque mechanism. Is it possible to adjust the speed of the motor? In fact, the motor is directly connected to the equipment. When the equipment is running, the load of the motor is very large, so the damage to the motor is also very large, but it is different after the reducer, such as a reducer with a reduction ratio of 100. , the load on the motor when the machine is running is only one percent. Moreover, Hino Electric believes that if the reducer is broken, just replace the lower gear, and the cost is much lower than that of the motor.

The purpose of the reducer is to reduce the speed and increase the torque. It has a wide variety of models, and different types have different uses. According to the transmission type, it can be divided into gear reducer, worm gear reducer and planetary gear reducer; according to the number of transmission stages, it can be divided into single-stage and multi-stage reducer.

Among the mechanisms currently used to transmit power and motion, the application range of the reducer is quite extensive. The application of the reducer can be seen from the transmission of large power to the transmission of small loads and angles. In industrial applications, the reducer has the functions of deceleration and torque increase.

The main functions of the reducer are:

1. Reduce the speed and increase the output torque at the same time. The torque output ratio is multiplied by the motor output multiplied by the reduction ratio, but it should be noted that the rated torque of the reducer cannot be exceeded.

2. Deceleration reduces the inertia of the load at the same time.